Well last night me and my son cleaned his Rem597 for the first time. Very fun father son time.''
I am big about the rods and brush being pulled in the same direction the round leaves the chamber, so we gently ran the rod down the barrel and attached the bore brush with the rod sticking into the receiver side.
we ran the brush, three passes, each time screwing the brushes on , in the receiver on the back side of the barrel, then two cotton swab passes.
the manual list barrel cleaning prior to field strip/break down, i thought it was easier to breakdown the rifle then clean all internals and last barrel, then place back together...
question though.....
1) is there a trick to get the springs on the alignment rods, i was able to make it happen pretty fast, but there has to be a trick the manual does not address.......
Cleaning
Moderators: Scorpion8, ripjack13, John A.
4 posts
• Page 1 of 1
Good work on the cleaning, I'm yet to do mine as waiting on my RFD to get a .22 boresnake in stock!
In terms of your question - i think it's just a case of what works for you. I have relatively small fingers so find it much easier that i thought i would. It's fiddly but not too bad. I've seen a tool for sale (can't remember where sorry), but don't see the need personally. ATB Toby Sent from my Nokia Lumia 920 using Tapatalk on Windows Phone 8 |
|
.22LR
Posts: 20
Joined: Sat Feb 09, 2019 4:00 pm Location: The Silver State, NEVADA |
If you think you had probs with the springs, be thankful you don't have the .22 WMR. There are springs within the springs. Thankfully I had a friend who was familiar with it and got it put back together again.
|
Wow maybe a good thing I bought a bolt 22 magnum! Love semi-auto but hate any BS.
|
|
4 posts
• Page 1 of 1
Return to Remington Autoloading Model 597
Who is online
Users browsing this forum: No registered users and 0 guests