• Advertisement

Getting ready for my first glass bedding.

Moderators: ripjack13, John A.


Copper BB
Posts: 5
Joined: Thu Jul 03, 2014 9:25 am
PostPosted: Sat Jul 05, 2014 10:54 pm
Hi all. Been reading up on glass bedding and have a kit on the way from Brownells. This will be my first try at it. Any Remington 783 specific advice out there? I'm also going to use any extra acraglass to fill the forend of the stock similar to one of the few other topics here. I have some glass micro balloons that I'll use to cut the weight in the forend... not in the action bedding though.

So from what I understand is I'll just take some material away near the pillars so the action just sits on them and makes no other stock contact. Any good transfer compound that I can use to make sure there is no contact with other parts of the stock? I've used lipstick (don't laugh, it really works) in the past, but I really should get something intended for the job.

Thanks in advance,
Ry
PostPosted: Mon Jul 07, 2014 1:15 pm
Never did a glass bedding...let us know how it turns out.

Copper BB
Posts: 5
Joined: Thu Jul 03, 2014 9:25 am
PostPosted: Tue Jul 08, 2014 10:17 am
Well my acuraglass came faster than expected. I have the rifle in the bedding compound and curing now. Not going to give too many details on the process as this was my first time bedding and I do not want to give any bad info.

One thing though that did help a lot was using some green masking tape , frog tape I think it is called, inside the stock action area. I used some layout fluid on the action and the green tape really showed where I needed more inleting. Far easier to see than the blue.


Hopefully in a day I'll be able to get the action free from the stock :|

Copper BB
Posts: 1
Joined: Tue Feb 24, 2015 12:32 am
PostPosted: Tue Feb 24, 2015 11:57 pm
Care to share the results?
PostPosted: Wed Feb 25, 2015 1:34 pm
Welcome to the Remington Owners Forum themonkeymixer !!

When you find the time...please introduce yourself to our membership in the "New Member Welcome Area"

.410
Posts: 34
Joined: Sun Mar 29, 2015 6:39 pm
PostPosted: Tue Apr 07, 2015 7:31 pm
Clear shoe polish is what I've been hearing on these Fors as a release agent !!! I used petroleum jelly on my action stock and one piece rail area of the action!! I just loved doing 4 with short strand fiberglass after I had torqued the action down and the glass turns trimmable just peal the tape back and the glass follows leaving a sharp almost invisible line you clean with a wood dowle! !! One mess and it's reinforced as well !! I waited two days for harding and it's strong as hell and cheap !!! Fill that recoil lug recess it will squeeze out of there and the action is almost locked with out bolts then you can clean around the barrel and lug 2 days laterImageImageImagesorry it's a bit dusty!

jason
Jason3gunsperfinger

Copper BB
Posts: 1
Joined: Fri Nov 30, 2018 2:07 pm
PostPosted: Sat Dec 01, 2018 8:43 pm
I’m starting a pillar and bedding project on my 783. Does anyone have any after photos they’re willing to share of the 783 stock? I see most youtube videos recommend filling the lug and rear tang area on other guns. The rear tang on the 783 isn’t really recessed so it doesn’t seem practical, but maybe I’m missing something.

Also, has anyone put pillars on a Boyd’s stock before? What do you do with the plastic insert for the magazine retainer?

Thanks.

Return to Remington Bolt Action Model 783

Who is online

Users browsing this forum: No registered users and 0 guests

  • Advertisement