• Advertisement

MILITARY SURPLUS HANDGUNS

Moderators: Scorpion8, ripjack13, John A.

PostPosted: Mon Jul 11, 2011 3:22 pm
Just wondering if anyone else on this forum collects military sidearms from WWI, WWII, the Korean conflict, or Vietnam War. Either Allied or Axis...Friend or Foe...or from any other combatant nation. I would like to see some pics and hear the story behind the weapon.

Pictured below is my P38 built by Spreewerke GmbH, Metallwarenfabrik, in Berlin/Spandau Germany in 1942 during the second World War. The Spreewerk inspection stamp consisted of an eagle above the number 88 (E/88), but the first 500 weapons made at the Spreewerke factory had Walther inspection stamps which consisted of an eagle over 359 (E/359) . (My specimen has a serial number of 246 and the Walther acceptance stamp E/359). The letters CYQ are the code used to designate construction at the Spreewerke plant, which produced around 285,000 units by the wars end. This specimen is also Wehrmacht stamped with an Nazi eagle over swaztika. The P38 is chambered for 9mm Parabellum and holds 8 rounds in the magazine. She also came with a black semi-hard leather holster that holds an extra magazine.

Image

The P38 was the first DA/SA pistol adopted by a major power. When the hammer is forward, squeezing the trigger will cock the hammer--by means of a draw bar on the right side of the frame--and fire the first round much like a DA revolver. After that the hammer remains cocked, and subsequent shots are fired in SA mode.If the hammer is cocked, rotating the safety lever on the left rear of the slide downwards will lock the firing pin in place. As the lever reaches the bottom, it trips the sear, allowing the hammer to travel forward. The safety can be left down, which blocks movement of both the trigger and hammer, or moved up, allowing the first shot to be fired in DA mode. A pin located above the hammer acts as a loaded chamber indicator.

.410
Posts: 42
Joined: Thu Mar 13, 2014 10:21 pm
PostPosted: Mon Apr 21, 2014 11:12 pm
I also have a P-38 and a Polish P64. I working on my Mosin Nagant fetish here lately.


TD
PostPosted: Wed Apr 23, 2014 1:16 pm
Which manufacturer on the P38 TD...!?

Wartime or post-war civilian...?

Any pics you would like to share...?

Always wanted a Mosin-Nagant...haven't pulled the trigger yet !
PostPosted: Wed Apr 23, 2014 1:31 pm
The Pistol Makarov (PM) { Pistolet Makarova } is a medium-size, straight blowback action, frame-fixed barrel handgun. In blowback designs, the only force holding the slide closed is that of the recoil spring; upon firing, the barrel and slide do not have to unlock, as do locked-breech design pistols. Blowback designs are simple and more accurate than designs using a recoiling, tilting, or articulated barrel, but they are limited practically by the weight of the slide. The 9x18mm cartridge is a practical cartridge in blowback-operated pistols; producing a respectable level of energy from a gun of moderate weight and size. The Makarov is heavy for its size by modern US commercial handgun standards, largely because in a blowback pistol the heavy slide provides greater inertia to delay opening of the breech until internal pressures have fallen to a safe level. Other, more powerful cartridges have been used in blowback pistol designs, but the Makarov is widely regarded as particularly well balanced in its design elements.

Image

Pictured above is my Cold War relic from the year 1961...an East German Makarov chambered in 9x18mm. She actually shoots pretty good for an old timer...

Copper BB
Posts: 3
Joined: Tue Nov 25, 2014 8:09 pm
PostPosted: Sun Jan 04, 2015 1:36 pm
My P 1. Dated Oct 1959Image
PostPosted: Sun Jan 04, 2015 5:46 pm
Seems to be in pretty good shape stan...!!

.410
Posts: 48
Joined: Mon Nov 05, 2018 4:44 am
PostPosted: Sun Aug 08, 2021 4:13 am
Spanish Star BM 9x19 seemed reasonable.

Return to Handguns

Who is online

Users browsing this forum: No registered users and 0 guests

  • Advertisement