RemingtonOwners.com • View topic

Board index » Shotguns » Remington VERSA MAX

Change font size

Print view

Bolt Snagging up

Moderators: Scorpion8, ripjack13, John A.

Post a reply

7 posts • Page 1 of 1

Copper BB

Posts: 1
Joined: Tue Nov 06, 2012 12:03 am

Posted: Tue Nov 06, 2012 12:09 am

My Versa Max was bought in january and basically sat in the gun cabinet until a few weeks ago. i have had problems with the bolt not wanting to close when cycled with ammo and even by hand. its very frustrating when you go to shoot your second shell and nothing happens cause the action is stuck open. all it takes to close it is a light bump or if i push the shell loader in it also closes it. has anyone else had these problems or know how i can figure out the problem so i can fix it? im also having problems with the nut at the end of the mag tube coming loose constantly along with the choke itself coming loose. HELP PLEASE

Top

Posted: Tue Nov 06, 2012 2:04 pm

Welcome to the Remington Owners Forum Jblount07 !!

First thing I would do is make sure the firearm is unloaded and lube the action with a good amount of oil then work it about 20 times to make sure the oil gets worked in.

The nut on the end of the mag tube can be secured with a little bit of Loctite BLUE...

http://www.loctiteproducts.com/p/10/15/ ... ue-242.htm

Please let me know how this remedy works for you...

Top

EricMoore EricMoore's Profile Copper BB Posts: 1 Joined: Fri Nov 09, 2012 1:37 am	Posted: Fri Nov 09, 2012 1:44 am Thanks for being here because I got the same problem then it works after trying the advise of shooter13. "Mishaps are like aitor knives that either serve us or cut us as we grasp them by the blade."
Top

vmax vmax's Profile .270 WIN Posts: 157 Joined: Mon Sep 26, 2011 12:59 am Location: ONTARIO CANADA	Posted: Fri Nov 09, 2012 12:12 pm They need lube like shooter stated very good. The loose barrel nut is a different story. Remington will send you a new nut and spring retainer there is a update. Mine is in the mail.Good luck. If you can't sell it don't buy it
Top

.270 WIN

Posts: 216
Joined: Sat Oct 27, 2012 10:08 pm

Posted: Mon Nov 26, 2012 9:05 pm

the shell carrier is dragging on the cast aluminum trigger group.
disassemble the firearm, removing the trigger group.
Now move the shell carrier up and down and look for any place it is dragging on the cast aluminum. Clean this area up with your wife's nail file and you should be good to go.

Lately I have noticed that the carrier in the elevated position is ever so slightly rubbing a small shiny spot on the trigger plate of guns currently on the shelf. I just checked a brand new one and it is that way. To look for this, remove the trigger plate assembly, hold the trigger plate so you are looking at it's left side....now raise the carrier and check if it's rolled edge is making contact with the left corner of the trigger plate, if so it will leave a small shiny spot. If this is the case a few boxes of shells will clear the issues you are having, but I will notify Remington so they can take a closer look at the Trigger Plate die's!
Please let me know what you see?

From Page 37 of this topic.
http://www.shotgunworld.com/bbs/viewtop ... &start=720

JM

We have done so much for so long with so little, we are now qualified to do anything with nothing!

Top

SHOOTER13 SHOOTER13's Profile	Posted: Tue Nov 27, 2012 4:45 pm Thanks for the remedy TuJays !! +1 rep point for the help...
Top

SHOOTER13 SHOOTER13's Profile	Posted: Tue Nov 27, 2012 4:46 pm Welcome to the Remington Owners Forum EricMoore !!
Top

Post a reply

7 posts • Page 1 of 1

Return to Remington VERSA MAX

Jump to:

Who is online

Users browsing this forum: No registered users and 0 guests